Menu
HomeTariffeWebinar
Connexion
Contatti
Contatti

A food-safety inspection on the farm: what to expect on the day

An inspector from the DDPP, the French departmental food-safety inspectorate, turns up without an appointment. What they check first, in what order, what they are entitled to ask for, and how a visit actually unfolds — beyond the food-safety management plan itself.

6 min
Five-stage timeline: identification on arrival, what can be seen in the first few minutes, the records, the processing workshop depending on the activity, then the report and its deadlines for bringing things into compliance.
An inspector has access to business premises and records, not to the private home without authorisation — VeraTrace diagram

In France, a food-safety inspection by the Direction Départementale de la Protection des Populations (DDPP — the departmental directorate responsible for consumer protection and food safety) is generally not announced in advance, so that what is observed remains representative. This guide describes how a visit usually unfolds, complementing our guide on digitising the food-safety management plan (plan de maîtrise sanitaire) — this one covers what happens on the day itself, not just the documents to prepare beforehand.

Arrival: identification and introductions

The inspector arrives with a professional card and a mission order, which they can produce on request. They generally state the purpose of the inspection (routine inspection, follow-up to a report, national thematic inspection) — information that helps focus the visit but does not exempt anything from being checked.

What is checked first

  1. The general state of the premises — visible cleanliness, separation of clean and dirty areas, condition of food-contact surfaces.
  2. Temperature records for the last few days, not just the day itself — see our guide on proving the cold chain for what a record must allow you to produce in a few minutes.
  3. Traceability of lots in stock — the ability to identify a specific lot and its suppliers on immediate request.
  4. Staff records — HACCP training, authorisations, medical checks where they are required.

What an inspector is entitled to do

  • Take samples for analysis, issuing a sampling receipt.
  • Photograph the non-conformities observed.
  • Request any document relating to traceability, without undue delay.
  • Access all premises linked to the activity being inspected, including storage areas.

For their part, the operator is entitled to be assisted, to ask for the precise grounds for an observation, and to receive a copy of any document signed at the end of the visit.

What is added for a processing workshop

Beyond the basic inspection, a processing workshop attracts additional attention to:

  • The forward-flow principle (marche en avant: physical or time separation of clean and dirty flows in the processing operation).
  • Records of equipment cleaning and disinfection.
  • Internal traceability linking incoming lots to processed lots — see our dedicated guide on one-step-back, one-step-forward and internal traceability.

At the end of the inspection

The inspection concludes with a sheet or report listing the findings, handed to the operator or sent in the following days depending on the procedure. Three possible outcomes, in increasing order of seriousness:

  1. A simple recommendation, with no formal follow-up, for an isolated minor deviation.
  2. A formal notice (mise en demeure), setting a deadline to correct an identified failing.
  3. An administrative enforcement measure (suspension of activity, seizure) reserved for serious failings or an immediate health risk.

What is not said often enough: the result becomes public

This is the element that most changes the significance of a visit, and it is missing from most descriptions of inspections.

Since French Decree No 2016-1750 of 15 December 2016, supplemented by the Order (arrêté) of 28 February 2017, the results of official food-safety inspections in France are published — on the Alim'confiance website and app, open to anyone, including your customers and your buyers.

The assessment falls into four levels:

| Level | What it means | |---|---| | Very satisfactory (Très satisfaisant) | no non-conformity, or only minor non-conformities | | Satisfactory (Satisfaisant) | non-conformities that do not justify an administrative enforcement measure, but give rise to a letter reminding the operator of the regulations | | Needs improvement (À améliorer) | corrective measures are needed | | Requires urgent correction (À corriger de manière urgente) | non-conformities liable to endanger consumer health — administrative closure, withdrawal or suspension of approval |

On display in the shop window, the rule is not uniform and the shortcut "it's optional" is wrong: the Order makes display mandatory for establishments falling under the second paragraph of Article D. 231-3-8 of the French code rural et de la pêche maritime (Rural and Maritime Fisheries Code), and optional for direct supply to the consumer and for collective catering (restauration collective — school, hospital and workplace canteens). Check which case applies to you rather than assuming.

The practical consequence is simple to state: a deviation handled properly on the day does not meet the same fate as one left as it is. The first is settled between you and the inspector; the second ends up on a page your customers can read.

Common mistakes

  • Refusing access to a room without legitimate grounds — a refusal is in itself a non-conformity, regardless of what the room would have revealed.
  • Not knowing that the result is published. The level awarded goes on Alim'confiance; finding out about the scheme after the visit is the worst time to find out.
  • Believing that display in the shop window is always optional — it is mandatory for some establishments.
  • Not keeping the reports of previous inspections — an inspector may ask to see the history of earlier visits and the follow-up given.
  • Correcting a non-conformity during the visit itself in the hope it goes unnoticed — an inspector generally records the initial state observed, not just the final state after an on-the-spot correction.

Checklist

  1. Check that the last few days' records are immediately available, not to be reconstructed.
  2. Keep the history of previous inspections and the follow-up given.
  3. Know the operator's rights (assistance, precise grounds, copy of the report) before an inspection takes place.
  4. Never refuse access to a room without documented legitimate grounds.
  5. Look up your own entry on Alim'confiance — know what your customers read there today, before the next visit.
  6. Check whether display of the hygiene level is mandatory in your case (second paragraph of Article D. 231-3-8) or optional.

Sources

Checked on 17 August 2026.

Cosa cambia per Lei

Lo stesso ragionamento non si gioca nello stesso punto a seconda del vostro posto nella filiera.

Lei è un produttore

An inspection is not limited to the binder — this guide describes how a visit actually unfolds, from the first exchange to the report handed over at the end.

VeraTrace per i produttori →

Lei trasforma, è un marchio

A processing workshop attracts different attention from a simple farm — the section on points specific to processing sets out what is added to the basic inspection.

VeraTrace per i trasformatori →

Lei gestisce un’attività alimentare

What follows an inspection — formal notice, penalty, or a simple recommendation — depends on the seriousness as perceived by the inspector, not only on strict compliance. This guide explains what influences that judgement.

VeraTrace per gli esercizi commerciali →

Concetti trattati

Comment ces textes sont écrits